LC Splice-On Connector
The weak point of other fusion splice-on connectors occurs when the shock absorber of the stop ring is sleeved by heat shrink after fusion splicing. Typically, if the ferrule fiber, primary fiber, and the ferrule take a load toward the primary fiber, the fiber can be bent as shown in the diagrams below – possibly causing a disconnection of the fiber. To resolve this problem, the UCL Swift fiber optic splice-on connectors, such as the LC Splice-On Connector, uses the ferrule to disperse this transformation and prevent fiber optic disconnect.
- Internal testing to verify performance and compliance with TIA-568-C.3
- Corresponding Telcordia GR-326-core
- Enhanced high quality with improved optical features (Insertion Loss & Return Loss)
- Enhanced & improved high tensile strength (exceeding 60N)
- Satisfy Vertical Burning test, materials compliant with UL94V-0
- Housing Color: SM-UPC (Blue), SM-APC (Green), MM (Beige)
Applications
- Medium and long range optical transmission circuit, LAN, CATV, FA, OA
- PC transmission system, measuring tools, etc.
- FTTx Network
| ITEM | SINGLEMODE APC | SINGLEMODE UPC | MULTIMODE UPC |
| Tensile | >60 newtons | >60 newtons | >60 newtons |
| Return Loss | >50dB | >60dB | >30dB |
| Insertion Loss | Average <0.15dB (max <0.30dB) | Average <0.15dB (max <0.30dB) | Average <0.15dB (max <0.30dB) |
| Part Number* | Description |
| LCS-SM-UPC-09/SA | Singlemode, UPC, 900 micron |
| LCS-SM-UPC-20/SA | Singlemode, UPC, 2mm |
| LCS-SM-APC-09/SA | Singlemode, APC, 900 micron |
| LCS-SM-APC-20/SA | Singlemode, APC, 2mm |
| LCS-OM1-UPC-09/SA | Multimode, OM1, UPC, 900 micron |
| LCS-OM1-UPC-20/SA | Multimode, OM1, UPC, 2mm |
| LCS-OM2-UPC-09/SA | Multimode, OM2, UPC, 900 micron |
| LCS-OM2-UPC-20/SA | Multimode, OM2, UPC, 2mm |
| LCS-OM3-UPC-09/SA | Multimode, OM3, UPC, 900 micron |
| LCS-OM3-UPC-20/SA | Multimode, OM3, UPC, 2mm |
| LCS-OM4-UPC-09/SA | Multimode, OM4, UPC, 900 micron |
| LCS-OM4-UPC-20/SA | Multimode, OM4, UPC, 2mm |
*Above part numbers are Simplex Connectors. For Duplex Connectors, substitute “S” with “D” in part number.
