Multipack-F Product Image

Multi-Pack F

Swift Multipack F is designed to assemble Swift fusion SOC with any splicer as well as Swift fusion splicers. 4 functions, stripping, cleaning, cleaving and sleeving, are in this single unit. This Swift Multi-Pack F satisfies users’ needs with its efficient and productive design. Remember, this unit can be used for other company’s splicers. Furthermore, users see very unique two functions from the Optical Power Meter & Visual Fault Locator in this unit; they easily see the result of splicing in real time. (ALLINONE+)

Stripping
  • No scratches from heated stripping
  • Over one-million cycle motorized
  • Stripping time : 1.5 sec
  • Over 5kg/f Tensile Strength of fiber after stripping
Cleaning
  • One-touch pump
  • Easy to refill cleaning alcohol
Cleaving
  • Single-action cleaving
  • Fiber chip collector attached
Built-in Power Meter and Fault Locator (PCT/KR2013/001243) 
  • Built-in two essential tools enable more efficient performance(option)
Capable of Assembling Swift Fusion SOC in any splicers

Stripping

 

  Stripping length   250µm
  Fiber diameter  0.25 ~ 0.9mm
  Blade Lifetime  More than 100,000
  Motor Lifetime  1,000,000
  Fiber Type  Single Fiber
  Tensile Strength test  More thank 3Kgf
  Heating time  2.2sec
  Heating Temperature  140˚C

 

Cleaning

 

  Method  Air-pump
  Cleaning Spec.  10ml / 24 times
  Cleaning Liquid  Alcohol

 

Cleaving

 

  Cleaving Length  7mm
  Blade Lifetime  50,000

 

Sleeve Heating

 

   Temperature  190˚C
  Time  30sec
  Sleeve Length  60mm
  Fiber Type  250, 900, 2 ~ 4 Connector 4Type (SC, FC, LC, ST)

 

Using Spec.

 

  Dimension  148x137x98mm
  Weight  1.2kg
CategoryDescription
Laser Source

Class 3b laser diode

Laser wavelengths (nm)

650nm (nominal)

Fiber compatibility

SM and MM

Output port

Universal adapter for connectors with 2.5mm ferrules

Output mode

CW or flashing (2~3 Hz)

Output power

>10mW into single mode fiber

Operating temperture

-10˚C to 50˚C

Storage temperature

-40˚C to 70˚C

Relative humidity

Typical 20sec with standard SM(ITU-T G.652)

Sleeve heating time

30sec, 50sec

Applicable protection sleeve

0% to 95% non-condensing

 

 
CategoryDescription
Laser Source

Class 3b laser diode

Laser wavelengths (nm)

650nm (nominal)

Fiber compatibility

SM and MM

Output port

Universal adapter for connectors with 2.5mm ferrules

Output mode

CW or flashing (2~3 Hz)

Output power

>10mW into single mode fiber

Operating temperture

-10˚C to 50˚C

Storage temperature

-40˚C to 70˚C

Relative humidity

Typical 20sec with standard SM(ITU-T G.652)

Sleeve heating time

30sec, 50sec

Applicable protection sleeve

0% to 95% non-condensing

 

Need a Sales Rep?
close slider

 

Looking for a sales rep in your region?

 

Use our interactive mapping tool for direct lines, email, and locations.

See Map