KF4A-HDC Kit
Active Cladding AlignmentALL-IN-ONE PRODUCT
SWIFT KF4A-HDC Kit
The new KF4A-HDC Kit utilizes the power of the Swift KF4A, an All-In-One, active cladding alignment fusion splicer, with the HDCFT Accessory Kit, allowing technicians to install hardened splice-on connectors in the field. This powerful duo equips technicians to perform the major 5 functions systematically: stripping, cleaning, cleaving, splicing and protecting; as well as installing a fully compatible OptiTap® Style hardened solution, ideal for harsh environments.
ROTATING BLADE LIFE UP TO 77,000
KF4A-HDC KIT INCLUDES
- Swift KF4A-HDC arc fusion splicer body
- Carrying case – hard case
- EI-24 spare electrodes
- CT-01 cooling tray
- KF-3400 battery
- Allen wrench
- Fiber holder, 900 micron (2) (HS-900)
- AC charger
- CD user guide
- Splice-on connector holder, SC/FC (KF4-SC)
- Splice-on connector holder for LC (KF4-ILC)
Category | Description |
Fiber alignment |
IPAAS Active Cladding Alignment |
Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable |
Fiber count |
Single fiber |
Applicable fiber dimensions |
Cladding diameter: 125μm, Coating diameter: 150μm~3mm |
Fiber setting and cleaved length |
0.20in to 0.63in |
Splicing modes |
Splice mode: 300, Heat mode: 100 |
Typical splice loss |
SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB |
Return loss |
> 60dB |
Splicing time |
Typical 7 sec with SM |
Sleeve heating time |
Typical 13sec with IS-60 mode, IS-60 sleeve |
Applicable protection sleeve |
2.4in, 1.5in and micro sleeves |
Storage of splice result |
Data: 5,000ea up to, Image: 5,000ea up to |
Tension test |
1.96N to 2.25N |
Operating condition |
Altitude: 0~5,000m above sea level, Temperature: 14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
Storage condition |
Temperature: 40°F~176°F, Humidity: 0~95% |
Dimension |
132(W) x 212(L) x 73(H)mm (without rubber protector) |
Weight |
1.5kg (including battery) |
Viewing method and display |
2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor |
Fiber view and magnification |
X/Y: 110X , Max: 220X |
Power supply |
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger |
No. of splice cycles with battery |
Typical 200 cycles |
Electrode life |
38,000 splices |
Blade Life |
Up to 77,000 cleaves |
Terminals |
USB |
Category | Model | Q’ty |
Arc fusion splicer |
SWIFT KF4A |
1
|
Battery |
KF-3400 |
1
|
Battery adapter |
FY1701000 |
1
|
Instructions for use |
– |
1
|
Spare electrode |
EI-24 |
1 pair
|
Transporting case |
HC-11 (hard case) |
1
|
Optical fiber holder |
– |
1 Pair
|
Cooling tray |
CT-01 (40mm (1.5in)) |
1
|
Allen wrench |
LD-3300 |
1
|
USB cable |
– |
1
|
Hard brush |
– |
1
|
Soft brush |
– |
1
|
Tool box |
– |
1
|
Tweezer |
– |
1
|
900 Micron Fiber Holders |
HS-900 |
1 pair
|
SC/FC Connector Holder |
HS-SC |
1
|
LC Connector Holder |
HS-ILC |
1
|
Category | Model |
Battery |
KF-3400 |
Cleaver blade |
BI-07 |
Electrode |
EI-24 |
Transporting case |
ILST-SS03 (L) (Soft Case) |
Work belt |
WB-01 |
Sleeve |
S09-C, S09, S30-C, S30 |
Sleeve clamp |
SC-01 |
SOC connector |
SC, LC, FC, ST (Refer to FTTx Solution catalogue) |
Manual stripper |
CF-02 |
External power |
DC 12V (Available for car cigar jack) |
Optical fiber holder |
HS-250, HS-900, HS-2.5, HS-IN, KF4-SC/FC, KF4-ST, KF4-ILC, LS-900 (choose one), HDC-900L, HDC-900S, ROC-900, SST-900L, SST-250L |
UPGRADE OPTION
VFL (Visual Fault Locator) utilizes a 650nm red laser to locate and visibly display any failure points throughout the cable.
InGaAs Power Meter (indium, gallium, arsenide) detects the amount of power lost during transmission and can help correct potential errors.
HDCFT-KIT ACCESSORY KIT*
- External heater for hardened connector weatherproofing
- Drop cable guide-snap mount
- Choose one of the five most popular hardened cable type holders
- Crimp tool for HDC
- Flat drop cable slitter
* Accessory kit required to install HDC Connector
WHAT IS ALL-IN-ONE?
UCL Swift’s fusion splicers integrate thermal stripping, cleaning, cleaving, splicing and protecting in to one convenient unit, reducing installation time and improving connection reliability. The All-In-One system provides an excellent working platform for high productivity.
- No scratches from heated stripping.
- 1 second strip time.
- Over 5 kgf tensile strength of fiber after stripping.
- Featuring excellent tensile force of fiber, the automatic stripper strips up to 28mm in length without damaging the surface of fiber.
- Minimum stripping length should be longer than 7.5mm.
- One-touch pump.
- The alcohol pump can be removed and refilled with cleaning fluid.
- Avoid splashing the alcohol please cover the top part of dispenser with cleaning cotton and push it.
- Single-action cleaving.
- Designed to cleave the fiber at a 90 degree angle.
- The fiber shards are collected in the slide-type chip box placed at the side of body.
- Splicing available for 1 core.
- After splicing the fiber splice must be visually perfect.
- Shrink down takes 20-35 seconds.
- Equipped with a sleeve loader to prevent contamination and provide convenience.
- Increased productivity from built-in sleeving unit.