ALL-IN-ONE PRODUCT
SWIFT KF4A-HDC
The new KF4A-HDC is an All-In-One, active cladding alignment fusion splicer, allowing technicians to install hardened splice-on connectors in the field. This powerful splicer equips technicians to perform the major 5 functions systematically: stripping, cleaning, cleaving, splicing and protecting; as well as installing a fully compatible OptiTap® Style hardened solution (HDCFT-01), ideal for harsh environments and FTTH applications.
ROTATING BLADE LIFE UP TO 77,000
ELECTRODE LIFE UP TO 38,000
-
Integrates 5 functions in one unit (stripping, cleaning, cleaving, splicing and protecting)
-
The fusion splicer with All-In-One system provides the best workability on the pole and limited work spaces
-
No scratches on fiber by thermal stripping
-
Compatible with Fusion Splice-On Connector (FSOC) in accordance with the industrial standard
-
Ideal for enterprise, data centers, broadband and FTTH network application
| Category | Description |
| Fiber alignment |
IPAAS Active Cladding Alignment |
| Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm cable |
| Fiber count |
Single fiber |
| Applicable fiber dimensions |
Cladding diameter: 125μm, Coating diameter: 150μm~3mm |
| Fiber setting and cleaved length |
7mm to 16mm (0.20 in to 0.63 in) |
| Splicing modes |
Splice mode: 300, Heat mode: 100 |
| Typical splice loss |
SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB |
| Return loss |
> 60dB |
| Splicing time |
Typical 7 sec with SM |
| Sleeve heating time |
Typical 13 sec with IS-60 mode, IS-60 sleeve |
| Applicable protection sleeve |
40mm (2.4 in) or 60mm (1.5 in) micro sleeves |
| Storage of splice result |
Data: up to 5,000 ea., Image: up to 5,000 ea. |
| Tension test |
1.96N to 2.25N |
| Operating condition |
Altitude: 0~5,000m above sea level, Temperature: 10°C~50°C (14°F~122°F), Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
| Storage condition |
Temperature: -40°C~80°C (-40°F~176°F), Humidity: 0~95% |
| Dimension |
132(W) x 212(L) x 73(H)mm (excluding bumper) |
| Weight |
1.5kg (including battery) |
| Viewing method and display |
2 CMOS cameras with 127mm (5.0 in) color LCD monitor |
| Fiber view and magnification |
X/Y: 110X , Max: 220X |
| Power supply |
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger |
| No. of splice cycles with battery |
Typical 200 cycles |
| Electrode life |
Up to 38,000 splices |
| Blade Life |
Up to 77,000 cleaves |
| Terminals |
USB |
| Category | Model | Q’ty |
| Arc fusion splicer |
SWIFT KF4A-HDC |
1
|
| Battery |
KF-3400 |
1
|
|
Battery adapter |
100 ~ 240V |
1
|
|
Instructions for use |
– |
1
|
| Spare electrode |
EI-24 |
1 pair
|
| Transporting case |
HC-11 (hard case) |
1
|
|
Optical fiber holder |
– |
1 Pair
|
|
Sleeve clamp |
SC-01 |
1
|
|
Cooling tray |
– |
1
|
|
Allen wrench |
CT-01 (40mm (1.5in)) |
1
|
|
USB cable |
LD-3300 |
1
|
|
Hard brush |
– |
1
|
|
Soft brush |
– |
1
|
|
Tool box |
– |
1
|
|
Tweezer |
– |
1
|
| Category | Model |
| Battery |
KF-3400 |
| Cleaver blade |
BI-07 |
| Electrode |
EI-24 |
|
Transporting case |
ILST-SS03 (L) (Soft Case) |
|
Work belt |
WB-01 |
| Sleeve |
S09-C, S09, S30-C, S30 |
|
SOC connector |
SC, LC, FC, ST |
|
Manual stripper |
CF-02 |
|
External power |
DC 12V (Available for car cigar jack) |
|
Optical fiber holder |
HS-250, HS-900, HS-2.5, HS-IN, KF4-SC/FC, KF4-ST, KF4-ILC, LS-900 (choose one), HDC-900L, HDC-900S, ROC-900, SST-900L, SST-250L |
| MODEL | DESCRIPTION |
| 580-900 | 5.4mm~5.8mm round drop cable holder with 900μm jacket holder |
| 500-900 | 5.0mm round drop cable holder with 900μm jacket holder |
| ROC-900* | ROC drop dielectric cable 5.4mm x 3mm cable, 900μm holder |
| SST-900L* | SST-drop outdoor dielectric cable holder 8.1mm x 4.5mm cable, 900μm holder |
| SST-250L | SST-drop outdoor dielectric cable holder 8.1mm x 4.5mm cable, 250μm holder |
| HS-IN | Drop dielectric cable holder 5mm x 2mm cable, 250μm holder |
*These items are included in the HDCFT Accessory Kit.
UPGRADE OPTION
The HDCFT-KIT Accessory Kit* (HDCFT-01) includes all the tools necessary to prepare and terminate a UCL Swift HDCFT fusion splice-on connector onto both a flat 8.1mm X 4.5mm drop cable and a ROC® style drop cable. Optional holders are available for other cable types.
* Accessory kit required to install HDC Connector; Sold separately from splicer kit
WHAT IS ALL-IN-ONE?
UCL Swift’s fusion splicers integrate thermal stripping, cleaning, cleaving, splicing and protecting in to one convenient unit, reducing installation time and improving connection reliability. The All-In-One system provides an excellent working platform for high productivity.
- No scratches from heated stripping.
- 1 second strip time.
- Over 5 kgf tensile strength of fiber after stripping.
- Featuring excellent tensile force of fiber, the automatic stripper strips up to 28mm in length without damaging the surface of fiber.
- Minimum stripping length should be longer than 7.5mm.
- One-touch pump.
- The alcohol pump can be removed and refilled with cleaning fluid.
- Avoid splashing the alcohol please cover the top part of dispenser with cleaning cotton and push it.
- Single-action cleaving.
- Designed to cleave the fiber at a 90 degree angle.
- The fiber shards are collected in the slide-type chip box placed at the side of body.
- Splicing available for 1 core.
- After splicing the fiber splice must be visually perfect.
- Shrink down takes 20-35 seconds.
- Equipped with a sleeve loader to prevent contamination and provide convenience.
- Increased productivity from built-in sleeving unit.
