SWIFT KR7
The Swift KR7 is an advanced ribbon splicer that can provide quality terminations for up to 12 fibers at once. Additionally, the KR7 uses a user-friendly GUI for installer convenience.
- 4.3-inch color LCD monitor with touch screen & bidirectional operation system
- Powerful lithium polymer battery with large capacity
- Portable thermal manual stripper, NO CRACKS ON ribbon fibers: IHS-12
- Equipped with sleeve loader to ease fiber loading for ribbon fiber
- Internet remote access maintenance
- User friendly GUI
- Resistance to shock, dust and water
- Performs 200 cycles of fusion splicing and sleeve heating with the standard battery
- Bidirectional Operation System
| Category | Description |
| Fiber alignment | Fixed V-Groove (Clad-to-Clad) |
| Applicable type of fibers | SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655) |
| Fiber count | Single fiber, 2~12 fiber |
| Applicable fiber dimensions | Single: Cladding diameter 125μm, Coating diameter 250, 900μm Ribbon: Cladding diameter 125μm, Ribbon fiber thickness: 0.25 to 0.40mm |
| Fiber setting and cleaved length | 0.40in |
| Splicing modes | Splice mode: 100, Heat mode: 100 |
Typical splice loss | SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB |
| Return Loss | > 60dB |
| Splicing Time | Typical 16sec with standard SM (ITU-T G.652) |
| Splice loss estimate | Available |
| Sleeve heating time | 1~2 core 20sec, 4~12 core 50sec |
| Applicable protection sleeve | 1.6in, 2.4in (fiber), Micro |
| Storage of splice result | The last 10,000 results to be stored in the internal memory (image 10,000 results) |
| Tension test | 2N |
| Operating condition | Altitude: 5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
| Storage condition | Temperature: -40°F~176°F, Humidity: 0~95% |
| Dimension | 5.6(W) x 6.4(L) x 5.7(H)in (including rubber) |
| Weight | 4.4Ib (including battery 5.5Ib) |
| Viewing method and display | Two CMOS cameras and 4.3-inch color LCD monitor with touch screen |
| Fiber view and magnification | 20X, MAX: 55X |
| Power supply | DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC adapter |
| No. of splice cycles with battery | 200 cycle |
| Electrode life | More than 1,500 times |
| Terminals | USB, external power (DC 12V available for car cigar jack) DC Output 13.2~16.8V |
| Category | Model | Q’ty |
| Arc Fusion Splicer | KR7 | 1 |
| AC Adapter | S311 | 1 |
Sleeve Loader | S312 | 2 |
Spare Electrode | EI-22 | 1 pair |
Battery Pack | K713 | 1 |
Alcohol Dispenser | – | 1 |
Cooling Tray | CT-03(60mm) | 1 |
Holder | H7-12 | 1 |
Manual Stripper (DC) | IHS-12 | 1 |
Cleaver | CI-03RT | 1 |
DC-Output Cable | – | 1 |
Tool Box | – | 1 |
User Manual | – | 1 |
Carrying Case | Hard Case | 1 |
Allen wrench | – | 1 |
Soft brush | – | 1 |
| Category | Model |
| Battery Pack | K713 |
Fiber Cleaver | – |
| Cleaver Blade | BI-07 |
| Electrode | EI-22 |
| Fiber Holder | H7-12,H7-10,H7-8,H7-6, H7-4, H7-2,H7-250, H7-900, H7-IN, H7-2.5, MPO-10, KR7-12 |
| Sleeve | R-F40(1.6in) |
| Sleeving Clamp | SC-01 |
| External Power | DC 12V Available for car cigar jack |
